Do you have 2 1200 watt subs and want to know what size amp you need? There are a few different factors that will determine how much power your system needs. First, the size of your vehicle’s battery is important because it decides how long your system can run without being plugged in.
Second, the number of amps required by each subwoofer will also affect how big of an amp you need. For example, if one subwoofer is rated at 600 watts while the other is rated at 800 watts, then they would require more amperage than if both were rated at 400 watts each. If you’re looking for a general rule of thumb for figuring out power requirements based on RMS rating, look below!
This Skar Audio RP-1200.1D amp good for 2 1200 watt subs.
What size amp do I need for a 1200w sub?
You would need an amp that can put out at least 1200 watts of power. If you have 2 subs, then you would want an amp that is rated for at least 2400 watts. Keep in mind that these are just general guidelines and your system may require more or less power, so it’s always best to consult with a professional before making a purchase.
How many channels do I need on my amp for 2 subs?
Since you are running two subs, you would need an amp with at least four channels. This will give each sub its own channel to work with and ensure that they are both getting the same amount of power.
Can a mono amp power 2 subs?
It is possible to use a mono amp to power two subs, but it is not recommended. A mono amp can only put out so much power and if you have two very powerful subs, they may not be able to get the power they need. It’s always best to go with an amp that has enough channels for your set-up.
How do you bridge a 2 channel amp to 2 subs?
You would need a Y-adapter to connect two channels of an amp together. This will allow that one channel to power both subs, but it is not ideal and can be dangerous if the amplifier does not have enough wattage for all four speakers.
What amp for 2 1200 watt sony subs?
you would need an amp that can deliver at least 2400 watts of power.
Can you wire two 1200 watt subwoofers together?
You could, but it is not recommended because both subs may not receive enough power and this will affect the sound quality. So instead, you should consult with a professional before making any purchases or wiring.
What if my amp is too powerful for my sub?
If your amp is putting out more power than recommended for your sub, this could cause damage to the speaker. It’s best to go with an amp that provides just enough wattage so you don’t risk damaging it and affecting sound quality.
Do I need a bigger alternator if I upgrade my amps?
Upgrading from stock car audio equipment to more powerful amplifiers can increase your energy needs, but you don’t necessarily need a bigger alternator. Instead, make sure your vehicle is running efficiently by having it serviced regularly and avoid driving with the engine turned off or with unnecessary accessories on.
What size amp do I need for my subwoofer?
This will depend on the RMS wattage of your subwoofer. You can find this on the product page or in the owner’s manual that came with it. If you have two, then you would want an amp that is rated for at least twice as much power to ensure they are both getting what they need!
How many amps do I need?
If you have a single subwoofer, then an amp with at least four channels should do the trick. If you’re running two subs, then look for something that has eight or more!
Can an amp be too powerful for speaker?
If an amp is putting out more power than recommended for your speaker, it could cause damage to the speaker. It’s best to go with an amp that provides just enough wattage so you don’t risk damaging it and affecting sound quality.
What if I have multiple amps?
If you have multiple amps, make sure each one has enough channels to accommodate your set-up. For example, if you have an amp with four channels and another one with eight, you will need to use a Y adapter or other means of connecting two devices so that each sub gets the power it needs.
How many volts does my speaker require?
If you’re not sure how much voltage your speaker needs, it’s best to consult with the manufacturer before making a purchase. Different subs require different voltages, so you don’t want to end up with an amp that doesn’t provide enough power or one that is too powerful and could potentially damage your equipment.
Is overpowering a sub bad?
If an amp is putting out more power than recommended for your sub, it could cause damage to the speaker. It’s best to go with an amp that provides just enough wattage so you don’t risk damaging it and affecting sound quality.
Can I use a battery to power my amps?
It is possible to use a battery to power your amps, but this is not recommended because it can be dangerous. If something were to go wrong with the battery or the wiring, you run the risk of an electrical fire. It’s best to use a quality power supply that is designed specifically for amplifiers.
Can I wire two amps together?
You could, but it is not recommended because both amps may not receive enough power and this will affect the sound quality. So instead, you should consult with a professional before making any purchases or wiring.
Conclusion:
If you are looking for a quick answer, it might be worth your time to figure out the total watts of amplification required. For example, if two 1200 watt subwoofers are being used with an amp that is rated at 500 watts per channel then the amplifier will need to have 2 channels capable of powering 1000 watts each or 4 channels capable of power 200 watts each.
By knowing this information before purchasing equipment you can make sure that what you buy has enough power and capacity for all your needs. This article should help get you started on understanding how amps work so please share it with any other person who may not know about these important facts!