Yes, it is possible to connect 6 speakers to a 4-channel amplifier, but it will require some additional wiring and possibly a speaker selector switch.
Here’s one way to do it:
- Connect the front left and front right speakers to channels 1 and 2 on the amplifier.
- Connect the rear left and rear right speakers to channels 3 and 4 on the amplifier.
- Connect the remaining two speakers to a speaker selector switch. This is a device that allows you to choose which pair of speakers to power at any given time.
- Connect the output of the speaker selector switch to channels 3 and 4 on the amplifier.
This setup will allow you to switch between the front and rear speakers, or have all six speakers playing at once. However, keep in mind that the amplifier may not have enough power to drive all six speakers simultaneously at high volume levels.
It’s also important to note that this setup will only work if the amplifier is stable at 2 ohms per channel. If the amplifier is not stable at 2 ohms, you will need to use a different wiring configuration or a different amplifier.
Quick Guide on How to wire a 4 channel amp to 6 Speakers
To wire a 4-channel amplifier to 6 speakers, you will need the following items:
- A 4-channel amplifier
- Six speakers (2 front, 2 rear, and 2 additional speakers)
- Speaker wire
- A speaker selector switch
- Wire stripper tool
- Electrical tape
- Wire connectors (e.g. butt connectors, spade connectors)
Here is a step-by-step guide on how to wire a 4-channel amplifier to 6 speakers:
- Locate the positive and negative terminals on the amplifier and the speakers.
- Strip the ends of the speaker wire using the wire stripper tool. Make sure to leave enough wire exposed to make a secure connection.
- Connect the front left and front right speakers to channels 1 and 2 on the amplifier using the wire connectors.
- Connect the rear left and rear right speakers to channels 3 and 4 on the amplifier using the wire connectors.
- Connect the additional two speakers to the speaker selector switch using the wire connectors. Make sure to follow the instructions provided by the manufacturer of the speaker selector switch.
- Connect the output of the speaker selector switch to channels 3 and 4 on the amplifier using the wire connectors.
- Use electrical tape to secure the wire connections and prevent any bare wire from touching any other metal surfaces.
- Turn on the amplifier and test the speakers to make sure they are working properly.
Note: It’s important to follow the manufacturer’s instructions for both the amplifier and the speaker selector switch, as the wiring and installation process may vary depending on the specific models you are using. It’s also important to make sure that the amplifier is stable at 2 ohms per channel before attempting to wire six speakers to it. If the amplifier is not stable at 2 ohms, you may need to use a different wiring configuration or a different amplifier.
MUST READ:
What size Amp do I Need for 2 800 Watt Subs?
What Size Amp Do I Need For A 2000 Watt Sub?
What Size Amp Do I Need For 2 1000 Watt Subs?